A microencapsulated MCT powder engineered around the highest practical oil payload, so you deliver more medium-chain triglyceride per gram of powder and less carrier into the finished formula. Built for capsule fillers, sachets, tablets and low-volume dosage formats where every milligram of the serving has to earn its place.

High-load MCT microencapsulated powder for capsules and sachets

Sensory Requirements

Item	Requirement
Character	Dry, free-flowing powder; no caking, adhesion or deliquescence
Colour	White or off-white
Odour & taste	No rancid, stale, spoiled or mouldy off-odour
Impurities	No visible foreign matter

Specification

Parameter	Unit	Specification	Method
Total fat	%	68.0 – 74.0	GB 5009.6
Caproic acid C6:0 (of total FA)	%	≤ 2.0	GB 5009.168
Caprylic acid C8:0 (of total FA)	%	50.0 – 80.0	GB 5009.168
Capric acid C10:0 (of total FA)	%	20.0 – 50.0	GB 5009.168
Lauric acid C12:0 (of total FA)	%	≤ 3.0	GB 5009.168
Myristic acid C14:0 (of total FA)	%	≤ 1.0	GB 5009.168
≥C16 (of total FA)	%	≤ 1.0	GB 5009.168
C8 + C10 (of total FA)	%	≥ 95.0	GB 5009.168
Acid value (as fat)	mg KOH/g	≤ 1.0	GB 5009.229
Peroxide value	mmol/kg	≤ 1.0	GB 5009.227
Protein	%	2.0 – 10.0	GB 5009.5
Moisture	%	≤ 3.0	GB 5009.3
Ash	%	≤ 5.0	GB 5009.4
Surface oil (wet basis)	%	≤ 5.0	SC/T 3505
Granularity (through 40 mesh)	%	≥ 90.0	GB/T 5507

Specification — Contaminants & Hazards

Contaminant	Unit	Specification	Method
Total arsenic (as As)	mg/kg	≤ 0.1	GB 5009.11
Lead (as Pb)	mg/kg	≤ 0.08	GB 5009.12
Total mercury (as Hg)	mg/kg	≤ 0.02	GB 5009.17
DBP	mg/kg	≤ 0.3	GB 5009.271
DEHP	mg/kg	≤ 1.5	GB 5009.271
DINP	mg/kg	≤ 9.0	GB 5009.271
Benzo(a)pyrene	µg/kg	≤ 2	GB 5009.27
Aflatoxin B1	µg/kg	≤ 0.5	GB 5009.22
Aflatoxin M1	µg/kg	≤ 0.5	GB 5009.24

Specification — Microbiological

Microbiological item	Unit	Limit (n c m M)	Method
Aerobic plate count	CFU/g	5 / 0 / 1000 / —	GB 4789.2
Coliforms	CFU/g	5 / 0 / 10 / —	GB 4789.3
Mould	CFU/g	< 10	GB 4789.15
Yeast	CFU/g	< 10	GB 4789.15
Salmonella	/25 g	5 / 0 / 0 / —	GB 4789.4
Staphylococcus aureus	CFU/g	5 / 0 / <10 / —	GB 4789.10

The table above is the standard specification for our microencapsulated MCT powder series. Oil load and carrier system are customised per application — send us your target application and we will recommend the matching grade. A batch COA is issued with every shipment.

Applications

Capsules, softgel alternatives and sachets — fewer units per dose at the same MCT intake.
Clinical and medical nutrition where the serving size is fixed by the pack or the prescription.
Compressed tablets and chewables needing a high oil content in a low-bulk powder.
Concentrated supplement sticks and single-serve formats.

Packaging

Pack size	Packaging
20 kg / bag	Composite kraft paper bag with PE inner liner (regular)
10 kg / bag, 20 kg / carton	Aluminium-plastic composite bag in cardboard carton
Custom	Packaging tailored to customer requirement

Documents Supplied

Batch COA (Certificate of Analysis) with every shipment
Technical Specification Sheet (EN/CN)
Third-party laboratory test report available upon request
ISO 9001 / ISO 22000 / ISO 14001 / ISO 45001 certificates
HACCP certificate
HALAL and Kosher certificates
Food Production Licence
FDA food facility registration (a facility registration only — not an FDA product approval)

Storage & Shelf Life

Store indoors in a clean, dry, ventilated place away from light. Avoid heat sources, strong odours and dust. Shelf life: 24 months at ≤ 25°C when unopened; once opened, use promptly.

Execution Standards

GB 15196 — National Food Safety Standard, Edible Oil Products
GB/T 29602 — Solid Beverages

Related Products

Powdered Medium-Chain Triglycerides (Pure C8) | MCT 70% Microencapsulated Powder | Ketogenic MCT Powder | All MCT Powder Products

Need the liquid form? See MCT Oil (Medium-Chain Triglycerides)

FAQ

What does “high-load” mean for this powder?

A higher share of MCT oil in the finished powder and less carrier: more MCT per gram of powder, so a fixed-size capsule, sachet or tablet delivers the same MCT intake in fewer units.

Which dosage formats suit it best?

Capsules, softgel alternatives and sachets, compressed tablets and chewables, plus clinical and medical nutrition where the serving size is fixed by the pack or the prescription.

How is it packed?

Standard packing is a 20 kg composite kraft paper bag with a PE inner liner; 10 kg bags in 20 kg cartons with an aluminium-plastic composite bag are available for smaller batches. Custom packaging can be arranged.

High-load powder or the standard MCT 70% powder?

The high-load grade targets volume-constrained formats such as capsules, tablets and sachets; the standard MCT 70% Microencapsulated Powder targets solid beverages, protein powders and shakes. Both are listed under Related Products.

What documentation comes with an order?

A batch COA and a technical specification sheet are supplied with every shipment; the full list is shown in the Documents Supplied section above.

Supplied factory-direct from our production base in Dongying, Shandong. Ready to request a quotation, a batch COA or packaging details for High-load MCT Microencapsulated Powder? Contact our sales team — Tel / WhatsApp +86 132 9546 7567.

Quality & compliance: quality control, certifications and supplier due-diligence support for this product are described in our Quality & Compliance section.

Manufacturing & Quality

This product is manufactured by Shandong Nametai Biotechnology Co., Ltd. at its Dongying plant (Yellow River Delta Agricultural High-tech Zone, Shandong), a 5,220 m² facility with an annual capacity of 10,000 tonnes. Production uses spray drying with a high oil-load wall system.

Every batch is tested in our in-house QC laboratory before release, covering the parameters listed in the specification table above. Heavy metals, plasticizers and microbiological items are verified through third-party laboratory reports. A batch COA is issued with each shipment.

The site holds ISO 9001, ISO 22000, ISO 14001, ISO 45001, HACCP, Kosher, HALAL, FDA food-facility registration and a China food production licence, all issued to Shandong Nametai Biotechnology Co., Ltd. The issuing body is printed on each certificate so it can be verified independently.

Typical use of this product: high-dose nutrition and clinical nutrition formats. To review the facility, the QC laboratory and the certificates held by the manufacturing site, see our factory and our certifications. For batch documentation, samples or a quotation, request a quote.

Commercial Terms

Minimum Order Quantity

The minimum order quantity is 1 kg for MCT Oil, MCT Powder and Specialty Esters.

Samples

Samples are available in 1 kg or 20 kg quantities, and sample quantities can also be customized according to customer requirements.

Lead Time

Regular orders: 7 days to port of departure. Samples: within 7 days to the port of departure, depending on sample quantity. OEM / custom orders: within 30 days from the order date.

Documentation

A batch COA (Certificate of Analysis) carrying the actual test results is issued with each shipment. TDS can be provided with shipment or upon request. Further documentation requirements can be discussed at the enquiry stage.

OEM / ODM

OEM / ODM services are available. Custom formulation requests can be evaluated according to product requirements.

Packaging

Standard packing is shown in the packaging table on this page. Bulk shipments can be arranged with four drums per pallet, stretch-wrapped for container loading. Other pack sizes can be discussed per order.

Payment

Payment terms are agreed upon according to the contract between both parties.

Auditing powder suppliers? How to Evaluate an MCT Powder Supplier and the block-by-block MCT powder specification checklist show what to verify before you commit.

For a quotation, a sample or batch documentation, please use the enquiry form on this page — request a quote.